EVCO c-pro mega RACK - Manual (Page 27)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 27
4 USER INTERFACE
4.1 Display and keypad
For the application there is an interface integrated with the controller (hereinafter referred to as
“built-in”).
It has a 4x20 character alphanumeric display, offer a range of keys for navigation/editing pages and
several LEDs for viewing certain associated events.
The keypad has 6 page navigation and value editing keys with the following functions:
- UP and DOWN: alters the parameters in editing mode; otherwise, it is used for moving the
cursor
-
LEFT and RIGHT: displays the screens in succession
- ENTER: confirms the value displayed in editing mode; otherwise, it runs any commands
associated with the text at the cursor point. If pressed for approx. 2 seconds while viewing
an alarm page, it allows the alarm to be reset. If viewing the alarm pages, each press scrolls
through the active alarms.
- ESC: cancels the present value if in editing mode; otherwise, it recalls any default page
associated with the current page. If the ESC key is pressed and held for approx. 2 seconds, it
allows the machine to be switched on/off.
There are also an additional 3 function keys:
- K0 = ALL: enters the alarm pages if pressed and held for approx. 2 seconds. Pressing mutes
the buzzer.
-
K1: not used
- K2: enters the application clock menu.