EVCO c-pro mega RACK - Manual (Page 67)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 67
Hd86
Fan 6 thermal DI
pos. Sets the position of the fan 6
thermal alarm digital input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Hd87
Fan 7 thermal DI
pos. Sets the position of the fan 7
thermal alarm digital input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Hd88
Fan 8 thermal DI
pos. Sets the position of the fan 8
thermal alarm digital input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Hd89
Fan 9 thermal DI
pos. Sets the position of the fan 9
thermal alarm digital input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Hd90
Fan 10 thermal
DI pos.
Sets the position of the fan
10 thermal alarm digital
input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Hd91
Fan 11 thermal
DI pos.
Sets the position of the fan
11 thermal alarm digital
input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Hd92
Fan 12 thermal
DI pos.
Sets the position of the fan
12 thermal alarm digital
input
0 0 12 (22) CO-Hw
Max =10(18)
on C-PRO
MEGA RACK;
Visibility
*²
Once machine parameters are configured, and every time configuration parameters are modified, it is
recommended the system be switched off and restarted in order to allow the card to configure itself correctly.
NOTES:
(
* ¹) Compressor visibility conditional.
Parameter visible if the compressor is configured: i.e. if the sum of the parameters indicating
the number of compressors per circuit (enabled) PG11, PG15, PG21 is greater than or equal
to the compressor in question.
( * ¹) Fan visibility conditional.
Parameter visible if the fan is configured: i.e. if the sum of the parameters indicating the
number of fans per circuit (enabled) PG41, PG45, PG51 is greater than or equal to the fan in
question.
The Default values for certain parameters vary depending on which controller is being used; the
differences are highlighted in the parameter table Notes field.