EVCO c-pro mega RACK - Manual (Page 32)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 32
In the REGULATION menu it is possible to set/view the parameters relating to the side band and
neutral zone thermoregulations for compressors, fans and any inverters, for each circuit:
⋅
type of regulation
⋅
setpoints
⋅
differentials
⋅
times
⋅
offsets
In the COMPRESSORS and FANS menu it is possible to set the parameters pertaining to device
management:
⋅
power of the individual compressors (if used)
⋅
type of rotation
⋅
increment logic
⋅
times
⋅
floating condensation parameters
⋅
high pressure pressure-switch alarm prevention parameters
The SAFETY DEVICES menu contains all the parameters pertaining to the alarms and management
of the safety devices for the compressors and fans
⋅
enabling
⋅
signal delays
⋅
reset type…
The MISCELLANEOUS menu contains other general parameters:
⋅
full-scale values for the transducers
⋅
Modbus communication
⋅
activations On/Off.
⋅
temperature probe activation
⋅
digital input and supervisor system secondary setpoint activation
⋅
analogue input type
⋅
refrigerant gas (when using temperature probes)
⋅
suction line compensation
⋅
password
From the DEFAULTS menu it is possible to restore the default values for all the application
parameters. This menu is only accessible with the machine switched off.
System builder menu
The system builder menu is a level 4 menu, i.e. it is necessary to insert the system builder level
password in order to be able to view/modify the parameters in this branch. Furthermore, this menu
is only accessible with the machine switched off.
This menu contains all the machine configuration parameters that decide the mode of operation and
which functions to activate, or restrict, depending on the system builder’s needs.