FingerTec TCMS V2 - Manual (Page 36)

36
Round Up
OT is rounded up to the nearest minute and
is set to 15, all minutes will be rounded up as
per below:
1-15 minutes = 15
16-30 minutes = 30
31-45 minutes = 45
46-59 minutes = 1 hour
Round Down
OT is rounded down to the nearest minute and
is set to 15, all minutes will be rounded down
as per below:
1-15 minutes = 0
16-30 minutes = 15
31-45 minutes = 30
46-59 minutes = 45
Round Midpoint
Once you insert a value here, the software will calculate the value’s midpoint. For example if you set the
value at 30 min, the midpoint would be 15 min. The clocking schedule’s OT time is 6.00pm and the mid-
point is 15 min.
If the user verifi es in less than 15 minutes after the OT time, for example 6.15pm, the software will round
down the transaction data to be displayed as 6.00pm. If the user verifi es more than 15 minutes after the
IN time, the software will round up the transaction data to be displayed as 6.30pm.
Rounding the OT time to the nearest (minutes)
First rounding time range
This function is designated for the IN time only. You can round the IN time into the
desired time. For example: any transaction between 9.01am – 9.15am round it to show
as 9.00am.
Last rounding time range
This function is designated for the OUT time only. You can round the OUT time into the
desired time. For example: any transaction between 5.01pm – 5.15pm round it to show
as 5.00pm.
Note: Specify the rules based on your company’s policy. Leave them blank if it’s not applicable to your environ-
ment.