FingerTec TCMS V2 - Manual (Page 55)

55
Set Terminal Date & Time
When you click on Set Terminal Date & Time , the current time displayed onscreen is
the computer’s time. You can make the changes and click Apply for the date and time to
take effect on your terminal.
Daily time synchronization with computer’s time
Time is exceptionally important for the TCMS V2. The time of the terminal and the time
of the computer must be synchronized at all times to produce accurate attendance and
access reports. The TCMS V2 allows you to set daily time synchronization to make sure
that both the time in terminal and PC are in sync. Determine the time and click
Set . Click
Apply to accept the changes.
Set Automatic Download Interval
This setting is for the
TCMS V2 to specify
the interval time in
which it will down-
load the clocking
data from the con-
nected terminals.
Setting the schedule for TCMS V2 to download data from Terminal
Specify the duration of the interval and the time the download process will take place.
Click on the
Perform daily download when PC is powered on if you want that for
your terminal.