FingerTec TCMS V2 - Manual (Page 54)

54
Terminal Last Update Status
Viewing the latest updates on the terminal
This function lets you check the latest updates performed on the terminal(s).
• Click Terminal ID and all the information and updates done will be displayed auto-
matically.
• You can print the latest updates by clicking on the Print button.
• To search for the latest update on a certain employee, fill up Employee ID or Em-
ployee Name and click Enter .
Confi guring Access Zones
Understanding Access Zones
The access zone function requires the installation for 2 terminals for a single door. This
is to control the accessibility of the door and also for the employee to perform verifica-
tion when the employee enter or exit the premises. With this function enabled, the
transaction data will be compiled to generate the Entry-Exit report to check the em-
ployees’ movement. All the In and Out transaction will be recorded in pairs.
• Click Devices and select Configure Access Zone .
• Input the description for the zone, for example R&D.
• You can input a description for the 2 terminals. You can set the description for the
terminal as Entry and Exit.
• Click Apply to save the settings.