FingerTec TCMS V2 - Manual (Page 53)

53
• Click Device and select Employee Access Code.
• You need to create 2 new codes. Code 0 is recommended to be set as Allow Access.
because all the new enrolled employees will be assigned to Access 0 automatically.
• Code 1 shall be set as No access.
• In the Access Code window, there are 2 columns. The employees assigned under the
access code will appear on the left column while the employees that are not assigned
under the access code will appear on the right column.
• To assign the employees to the access code, select the employees in the right column
press the left arrow to transfer the selected employees into the left column. To remove
the employee from the Access Code, select the employees in the left column and click
the right arrow to transfer the selected employees into the right column.
Terminal Employees Control
Assigning Terminals with Access Codes
Now you have named the Access Codes, you can assign the terminal with the Access
Codes. By doing this, you are controlling your terminal from unauthorized access.
• Click Devices and select Terminal Employee Control. Click on the Authorized Access
tab
• For Access Code 0, which is Allow Access, check on the checkbox in the Allowed col-
umn to enable the access.
• For Access Code 1: No Access, do not check the checkbox in the Allowed column.
• Click Update terminal to update the settings into the terminal.