CIRCUTOR CVMk2 Series - Manual (Page 103)

103
CVM k2
DISPLA
Y
6.2. DEMAND
On the demand screen, the user can select the Demand to be displayed. This corresponds to
the desired fee from among all those that are configured.
If no tariff has been configured, number 1 will be chosen by default.
The following parameters are displayed for all tariff on the demand screen.
p. total : Total active power for the tariff.
s.Total : Total apparent power for the tariff.
I1 : Phase 1 current
I2 : Phase 2 current
I3 : Phase 3 current
I. AVG : Mean for the three phase currents.
On this screen, the following options are shown above the function buttons:
Info : This displays the system information screen (Section 6.1.1.1., System Information).
Max : This displays the screen with the maximum values stored. The maximum values for each
variable recorded since the last reset are displayed on the screen along with the date
and time of registry.
On the Max screen, the INST. option appears, which can be used to return to the screen
that displays the instantaneous variables.
The maximum demand values stored in memory are displayed on the MAX
screen.