7 - profibus communications card, Profibus card configuration, Card parameters – CIRCUTOR CVMk2 Series User Manual
Page 73
73
CVM
k2
CONFIGURA
TION
4.7.7 - PROFIBUS COMMUNICATIONS CARD
Read Section 4.7.0., Inserting
Expansion Cards.
4.7.7.1. Profibus card configuration
This card has no paramenters to configure. Only the peripheral number (Slave ID) explained
in chapter 4.7.7.3
Going into configuration menu only will appear:
CARD. OK
or
CARD NOK
.
To access the configuration of the card of profibus protocol, enter the configuration menu (
menu
---> setup.
). in the
EXP. CARD
menu, select the position where the card is inserted. Press
SET
to
enter in the card menu.
4.7.7.2. Card parameters
To visualize the parameters that CVMk2 shows refering to the profibus communications card,
you have to go to the cards menu:
MENU
-->
EXP. CARD
-->
CARD
X*.
(*) Value 1, 2 or 3, depending on the card position.