CIRCUTOR CVMk2 Series - Manual (Page 53)

53
CVM k2
CONFIGURA
TION
4.7.2.5. Expansion card parameters
To see the parameters of the expansion card, you have to intro in menu , select cards , and go
to the card to see the parameters.
The picture shows the status of the inputs of the cards or the number of impulses that has
counted each one.
4.7.2.6. Features
FEATURES VALUE UNIT
LOGICAL INPUTS
Type of input Voltage free contact
Type of coupling Optically isolated input
Maximum peak voltage 24 VDC
I
on
< 8 mA
Input comsumption < 0,5 W
Minimum times
t
on
40 ms
t
off
40 ms
RELAY OUTPUT
Nominal Voltage 230 / 125 VAC / VDC
Nominal Current 6 / 1,5 AAC / ADC
Maximum load VAC 250 / 6 VAC / AAC
Maximum load VDC 30 / 6 VDC / ADC
Minimum relay load
1 VAC / VDC
1 mA
Mechanical life 5 x 10 6 cycles
Electrical life at rated load NA:5 x 10 4 , NC:3 x 10 4 cycles
CONNECTIONS
Maximum torque 0.3 Nm
Wire cross section (Cu) 0,05..1 (AWG 30...18) mm 2