CIRCUTOR CVMk2 Series - Manual (Page 95)

95
CVM k2
DISPLA
Y
6.1.4.2 Current phasors display
Phasors are graphically displayed in this figure. A table of the most representative numeric
values is also displayed on this screen.
TEXT VALUE DESCRIPTION
L1 240.0 RMS value for line 1.
L2 239.8 RMS value for line 2.
L3 240.1 RMS value for line 3.
I1 FUND 235.2 Value of the phase 1 fundamental.
I2 FUND 233.5 Value of the phase 2 fundamental.
I3 FUND 235.6 Value of the phase 3 fundamental.
Ø 1-2 120.4 º Angular difference between phases 1 and 2.
Ø 2-3 120.4 º Angular difference between phases 2 and 3.
Ø 3-1 119.2 º Angular difference between phases 3 and 1.
Freq: 50.14 Frequency of the phases (phase 1).
WARNING: It is only possible to navigate through the top menu using the
right/left arrow buttons in the numeric display screen (6.1.4.).
Hold : This option takes a screen shot of the waveform currently being viewed.
The Run button permits returning to the continuous waveform display mode.
Phas : This access the phasors graphical display screen. The phasors display screen only
gives the data (F4) option on the bottom menu. Pressing data will return the user to
the screen that displays the variables' real time numeric values. (See Section 6.1.4.)