7 expansion cards, Inserting expansion cards – CIRCUTOR CVMk2 Series User Manual

Page 38

Advertising
background image

38

CVM

k2

CONFIGURA

TION

4.7 EXPANSION CARDS

4.7.0. INSERTING EXPANSION CARDS

To insert an expansion card in the

CVMk2, follow the procedure described here. Keep in mind

that the images demonstrate how an expansion card is inserted in slot (position) 1. Position/slot

2 is immediately below slot 1, and position/slot 3 is furthest away from the terminal strips.

Insert the card by sliding it between the two lateral

guides.

Carefully press to assure that the expansion card is

properly connected in the

CVMk2.

Shut off the power supply to the system.

Unscrew and remove the protective cover.

Before doing any maintenance or repair work or handling any of the system

connections, disconnect the device from all power sources: power supplies

and input signals alike. Working on the system while it is powered up is

dangerous, and it can cause irreversible damage to the system.

Advertising