Tcp2rs converter – CIRCUTOR CVMk2 Series User Manual
Page 125
Advertising
125
CVM
k2
OPERA
TION
125
CVM
k2
COMMUNICA
TION
The connection with the measurement module using an Ethernet converter is displayed in
the figure. This converter permits using the Modbus/TCP protocol. To communicate with the
ethernet converter, the IP address configured has to be in the same range than the computer
and configured with the same baudrate in the XPORT that the device. (See chapter 4.6
Communications)
8.2.2. TCP2RS CONVERTER
Advertising