CIRCUTOR CVMk2 Series - Manual (Page 57)

57
CVM k2
CONFIGURA
TION
The different buttons that appear on this screen are:
Next : This button is clicked to increase the input number to a maximum of 8 ( A/D IN 08 ).
Select it again to return to input 01 ( A/D IN 01 ).
OUT : From any input screen, click on this option to access the analogue outputs'
configuration screen. (See Section 4.7.3.1)
EDIT : Click on this option to access the parameters edit menu. The arrow buttons are used
to select the parameter to be modified (in bold) and access the parameters by pressing
SET .
4.7.3.3. Analogue inputs configuration
The analogue inputs' configuration parameters follow:
Scale : Input range. Choose between 0...20 mA or 4...20 mA.
Zero : The value to be viewed at the origin of the axis (4 or 20 mA).
Bottom of scale .: The value to be viewed when the input is set at 20 mA.
Dec. pos. : Decimal point position.
The following menu options will appear on the parameters' edit screen.
ESC : Exit the current menu without saving changes.
OK : Save the changes made and exit the edit screen.
The card's analogue inputs configuration screen is shown in the following figure: