Z8® control and peripheral registers, Standard z8 registers, Control and peripheral registers – Zilog Z86193 User Manual
Page 22
Z8
®
CPU
User Manual
UM001604-0108
Address Space
15
Refer to the specific product specification to determine the above registers are imple-
mented.
Z8
®
Control and Peripheral Registers
Standard Z8 Registers
The standard Z8 control registers govern the operation of the CPU. Any instruction which
references the register file can access these control registers. The following control regis-
ters are available:
•
Interrupt Priority Register (IPR)
•
Interrupt Mask Register (IMR)
•
Interrupt Request Register (IRQ)
Table 7. Z8 ERF Bank Layout
ERF Bank ERF
Fh
PCON, SMR, WDT, (00h, 0Bh, 0Fh)
, Working Register Group 0 only
implemented.
Eh
Not implemented (reserved)
Dh
Not implemented (reserved)
Ch
SPI Registers:
SCOMP, RXBUF, SCON (00h, 01h, 02h)
, Working
Register Group 0 only implemented.
Bh
Not implemented (reserved)
Ah
Not implemented (reserved)
9h
Not implemented (reserved)
8h
Not implemented (reserved)
7h
Not implemented (reserved)
6h
Not implemented (reserved)
5h
Not implemented (reserved)
4h
Not implemented (reserved)
3h
Not implemented (reserved)
2h
Not implemented (reserved)
1h
Not implemented (reserved)
0h
Z8 Ports 0, 1, 2, 3, and General-Purpose Registers
04h
to
EFh
, and
control registers
F0h
to
FFh
.