Fluke Biomedical HHC3 User Manual
Page 30
Advertising
![background image](/files/785486/content/doc030.png)
HHC3
Users Manual
3-4
9. After two seconds, the display changes to:
10. If the two-digit waveform number just entered is a stepped command, the
display shows the corresponding command description of the selection
value along with the arrows. For example, if you pressed the dual keys
D P
, the display changes to:
11. Press R or S to select one of the values, and then press T. The
display shows:
12. Press S to scroll through the menu. The display shows:
If you press T at the DEFINE AS IMMEDIATE menu, the Controller
defines the new selection as an immediate command with the selected
value of the stepped command.
Advertising