Testing the connection – Fluke Biomedical HHC3 User Manual
Page 58
Advertising
HHC3
Users Manual
4-6
Testing the Connection
Soon after the application starts, the HHC–Utility software displays:
ems006s.bmp
Launch the HHC-Utility software and select the Serial Port or USB Port to
which the Controller is connected.
Select the Serial Port radio button if the Controller connects to the PC via an
RS232 cable, and then select the appropriate COM Port. Select USB if the
Controller connects to the PC via a USB-to-RS-232 converter cable. Select the
appropriate COM Port.
Advertising