Fluke Biomedical HHC3 User Manual
Page 37
Advertising
![background image](/files/785486/content/doc037.png)
Programming User Sequences
Defining User Sequences
3
3-11
After two seconds, the display changes to display the type of delay defined
previously for that command. If DELAY was IMMEDIATE, the display
shows:
If DELAY was MANUAL, the display shows:
If you defined the Delay as Timed, the display shows:
5. If the two-digit waveform number just entered is a stepped command, the
display shows the corresponding command description of the default
selection value along with the arrows. For example, if you press the dual
keys D P, the display shows:
6. Press R or S to select one of the values, and then press T. The
display then shows this menu:
Advertising