Fluke Biomedical HHC3 - Manual (Page 66)

HHC3
Users Manual
4-14
If you have clicked the UPLOAD button but have not selected the required
parameters, an error message appears as follows:
ems022s.bmp
Click the OK button and select the required parameters.
If the software does not receive the “number of packets” value or a complete
packet within the given time, an error message appears as follows:
ems023s.bmp
Click the OK button and try uploading again.
If data read from the port is not of the valid format, an error message appears
as follows:
ems024s.bmp
Click the OK button and try uploading again.