Fluke Biomedical HHC3 User Manual
Page 40
Advertising
HHC3
Users Manual
3-14
14. At this point, you can select any of these types of delay and press T. If
the delay type selected is DEFINE TIMING DELAY, the display changes
to:
15. Enter the time delay after the command in hours, minutes, seconds (HH
MM SS) format. For example:
16. Press T after you define the delay. The display changes to:
After 2 seconds (if the defined ACTION was STOP), the display shows:
If you press T at the SKIP EDIT DELAY option, the Controller also
shows the following display:
Advertising