Fluke Biomedical HHC3 - Manual (Page 48)

HHC3
Users Manual
3-22
6. Press S to scroll through the menu:
7. At this point, two choices are available. If you pressed T at the
DEFINE AS IMMEDIATE menu, the Controller defines the command as
a stepped command and adds it to the existing sequence. Alternatively, if
you pressed T at the DEFINE AS STEPPED menu, the Controller
defines the new user sequence as a stepped command. The display then
shows:
After two seconds, the display changes to:
8. Press R or S to scroll through the menu for selecting the type of
delay. Press S, and the display changes to:
9. At this point, you can select any of these types of delay and press T. If
the delay type selected is DEFINE TIMING DELAY, the display changes
to: