Fluke Biomedical HHC3 User Manual
Page 47
Advertising
Programming User Sequences
Defining User Sequences
3
3-21
command, the display shows the corresponding command description. For
example, if you press the dual keys C B, the display changes to:
3. Press T to add the command for the existing user sequence. The display
changes to:
After two seconds, the display changes to:
4. If the two-digit waveform number just entered is a stepped command, the
display shows the corresponding command description of the default
selection value along with the arrows. For example, if you pressed the dual
keys D P, the display changes to:
5. Press R or S to select one of the values, and then press T. The
display then shows this menu:
Advertising