Editing commands – Fluke Biomedical HHC3 User Manual
Page 36
Advertising
![background image](/files/785486/content/doc036.png)
HHC3
Users Manual
3-10
Editing Commands
1. If you press T when EDIT COMMAND displays, you can edit the
selected command; the display then shows:
2. Press the first digit (from B to J) of the chosen two-digit waveform.
3. Press the second digit (from B to P) of the chosen two-digit
waveform. If the two-digit waveform number just entered is an immediate
command, the display shows the corresponding command description. For
example, if you press the dual keys C B, the display shows:
4. Press T to edit one of the selected user commands. The display changes
to:
Advertising