Fluke Biomedical HHC3 - Manual (Page 69)

A-1
Appendix A
Dual-Key Commands
Introduction
BP1, BP2, BP3, or BP4 are set to normal values by sending command P1LV,
P2ART, P3PA, or P4RV, respectively, for all three simulators. Follow this
with one of the commands shown in Table A-1.
Table A-1. Dual-Key Commands
Keys Command Description medSim 300B MPS450 Marq III
B
B
NSR
NSR
NSR
NSR
NSR Rate
Normal sinus ECG at 30 BPM NSB30 (Step) NSR30 (Step) NSR30 (Step)
Normal sinus ECG at 40 BPM NSR40 NSR40
Normal sinus ECG at 45 BPM NSR45 NSR45
Normal sinus ECG at 60 BPM NSB60 NSR60 NSR60
Normal sinus ECG at 80 BPM NSB80 NSR80 NSR80
Normal sinus ECG at 90 BPM NSR90 NSR90
Normal sinus ECG at 100 BPM NSR100 NSR100
Normal sinus ECG at 120 BPM NSB120 NSR120 NSR120
Normal sinus ECG at 140 BPM NSR140 NSR140
Normal sinus ECG at 160 BPM NSB160 NSR160 NSR160
Normal sinus ECG at 180 BPM NSR180 NSR180
Normal sinus ECG at 200 BPM NSB200 NSR200 NSR200
Normal sinus ECG at 220 BPM NSR220 NSR220
Normal sinus ECG at 240 BPM NSB240 NSR240 NSR240
Normal sinus ECG at 260 BPM NSR260 NSR260
Normal sinus ECG at 280 BPM NSR280 NSR280
B
C
Normal sinus ECG at 300 BPM NSB300 NSR300 NSR300