Formax ColorMaxLP Operator Manual - Manual (Page 24)

24
Using the Printer
Formax
Choosing Label Media
Ensure that the label media meets the requirements for the printer ( Table 1 ).
Figure 1 Media Roll
Table 1 Media specifications
Media Type and Dimensions
Media type Gloss, semi-gloss, and matte.
Label width 2.0” to 8.5” (50.8 mm to 215.9 mm)
Label length Continuous/Roll-to-Roll: Maximum 40” (1.016 m)
Roll to Cut/Print and Present: Maximum 8" (203.2mm)
Label thickness Maximum 0.01” (0.3 mm, including liner)
Minimum 0.005” (0.13 mm)
Core size Requires 3” (76.2 mm)
Roll diameter Maximum 8” (203.2 mm)
Media Handling
Print mode • Roll to cut
• Print and present (non-peel)
• Roll to roll
Detection • Gap
• Continuous
• Black mark (3mm wide, 25.4mm long on left)
Coating on
J
I
Minimum Maximum
I 3.0” (76.0 mm) cardboard core 3.0” (76.0 mm) cardboard core
J N/A Up to 8.0” (203.0 mm)
the outside