Formax ColorMaxLP Operator Manual - Manual (Page 61)

ColorMaxLP Label Printer
Printer Maintenance
61
Replacing the Waste Ink Absorber
1. Open the front cover of the printer.
2. Squeeze the latches on both sides of the waste ink absorber and pull it out.
3. Remove the waste ink absorber.
4. Slide the new waste ink absorber into the printer. Push it in until it clicks into place.
5. Close the front cover.
NOTE: Take care when replacing the waste ink absorber to avoid staining hands and
clothing. Dispose of the used waste ink absorber according to local regulations.
Tools • Nitrile powder-free gloves