Formax ColorMaxLP Operator Manual - Manual (Page 31)

ColorMaxLPLabel Printer
Using the Printer
31
Adjust Alignment from Printer Driver
The offset settings are found on the Media tab,
in the Position Adjustment section.
Use the controls to enter in the adjustments
necessary to center the printed image on the
label.
Adjust Alignment from Control Panel
This setting requires security Level 1 (supervisor) or higher. Select the security level
before you proceed (see
Selecting the Security Level on page 12).
   
PP
CONFIGURATION
6. ADJUST OFFSET
ADJUST OFFSET
1. TOP OF FORM
TOP OF FORM
(Config)
(Select)
(Select)
Press , to choose + or – and to set
each digit.
Press to move to next position.
1. On the control panel, select (Config)
> ADJUST OFFSET > TOP OF FORM or
LEFT EDGE.
2. Set the offset value.
3. Press to return to the main menu.