Formax ColorMaxLP Operator Manual - Manual (Page 3)

3
Safety Precautions
Electrical Shock Hazard
Do not disassemble any part of your printer. There are no user-repairable parts inside
the printer. Disassembly of any part of the printer will void all warranties.
Fire Hazard
Keep the printer well away from all heat sources and flammable substances.
Switch your printer off immediately and unplug the power cord from the wall socket if
you notice any of the following:
• Smoke rising from the printer.
• An acrid smell coming from the printer.
• Sparks being emitted from printer.
Contact your supplier as soon as possible.
WARNING: Hazardous Moving Parts
Keep fingers and other body parts away from the printer.
Installation
• Install the printer on a flat, level surface.
The printer must remain level at all times. Tilting the printer may cause undue
leakage of ink and may damage the printer.
• Avoid wide temperature variations.
Install the printer in a protected location away from direct sunlight, open windows
or any other places subject to temperature extremes.
Power Supply
• Always use the Power button on the control panel to turn the printer off. Removing
power to the printer in any other manner may damage the printer.
• Use only the supplied power adapter and cord.
Use of any other power supplies or cords may damage the printer and void your
warranty.
Input Rating 100–240 VAC, 50/60 Hz, 3.6 A
Operating Temperature 15°C to 35°C