Configuring e1 and t1 at the physical level – GAI-Tronics LE300-IP Page/Party Line Extender User Manual
Page 46
Advertising
Pub. 42004-488C
M
ODEL
LE300-IP
P
AGE
/P
ARTY
®
L
INE
E
XTENDER
P
AGE
43 of 68
e:\standard ioms - current release\42004 instr. manuals\42004-488c.doc
09/14
Configuring E1 and T1 at the Physical Level
E1 and T1 interfaces must be configured at the physical level first. To configure E1 and T1 at the physical
level:
From the TDM Interface Type menu (Configuration > Physical layer > TDM interface type), select the
TDM interface type, E1 or T1.
The default TDM Interface Type is T1.
Advertising