Performance monitoring, E1/t1 statistics – GAI-Tronics LE300-IP Page/Party Line Extender User Manual

Page 60

Advertising
background image

Pub. 42004-488C

M

ODEL

LE300-IP

P

AGE

/P

ARTY

®

L

INE

E

XTENDER

P

AGE

57 of 68

e:\standard ioms - current release\42004 instr. manuals\42004-488c.doc
09/14

Performance Monitoring

The IPmux-24 provides performance monitoring tools, which consist of the following three levels:

1. E1/T1 statistics - Status of the physical E1/T1 parameters (signal, framing, etc.)

2. Ethernet statistics - Ethernet connection status (speed, duplex mode, bytes transmitted & received,

etc.).

3. Bundle connection statistics - PW bundle connection status on the PSN level.

E1/T1 Statistics

E1/T1 statistics refer to the physical status of the E1/T1 traffic reaching IPmux-24 from the adjacent E1/T1
device. E1/T1 statistics are monitored and saved under consecutive intervals. Each interval is 15 minutes
long. There are 96 intervals, which represent the last 24 hours. Whenever a new interval is started, the
counters are reset to zero. The old interval shows the total of events that occurred during its 15-minute
period.

The current active interval is always marked as interval 0 (you will see that the Time Since counter is
running). The previous interval is marked as 1, and so on. The E1/T1 statistic counters cannot be reset
manually.

From the Monitoring menu (Statistics> TDM Physical Layer> T1):

Enter the number of the interval whose statistics you wish to display, and press E

NTER

.

Advertising