GAI-Tronics LE300-IP Page/Party Line Extender - Manual (Page 52)

Pub. 42004-488C
M ODEL LE300-IP P AGE /P ARTY
®
L INE E XTENDER P AGE 49 of 68
e:\standard ioms - current release\42004 instr. manuals\42004-488c.doc
09/14
Table 32. Input/Output Termination Connection Module
Designator Type Function
J1 DB-25 connector Connects to J3 on Main PCBA via ribbon cable.
TB1 Terminal block Field connections for contact output #1
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB2 Terminal block Field connections for contact output #2
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB3 Terminal block Field connections for contact output #3
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB4 Terminal block Field connections for contact output #4
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB5 Terminal block Field connections for contact output #5
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB6 Terminal block Field connections for page audio detected contact output
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB7 Terminal block Field connections for page ground fault contact output
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB8 Terminal block Field connections for contact inputs #1, #2, and #3
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB9 Terminal block Field connections for contact inputs #4 and #5
Field connections for chassis ground
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.