GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual - Manual (Page 10)

Foreword ICP9000 Navigator Installation and Service Manual
12/10 6
Model Chart
The Main Control Unit (MCU) model number, located on the nameplate on the end of the unit (could be
the bottom or side, depending on mounting configuration), specifically identifies GAI-Tronics’
equipment. The last two digits in the model number indicate the number of channels available within that
specific unit (04A = 4 channels, 08A = 8 channels, 12A = 12 channels). Factory-installed options are
identified in the display area of the Navigator PC screen upon the initial application of power.
The following is a list of the ICP9000 Navigator Series Console models:
Model Description
ICPN9004A 4-Channel Navigator Series MCU (expandable)
ICPN9008A 8-Channel Navigator Series MCU (expandable)
ICPN9012A 12-Channel Navigator Series MCU