Definitions and acronyms – GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual User Manual

Page 87

Advertising
background image

83

12/10

Definitions and Acronyms

Term Definition

CSQ

Carrier squelch

Capcode

The identifying number on the outside of the radio pager. It is related to the tone or
digital code that gives the address and other information about this particular pager.

Carrier Squelch

Detection of a valid mobile signal is based on loss (squelch) of random channel
noise.

CTCSS

Continuous Tone Controlled Subaudible System - A means of grouping users of a
common radio channel. Subaudible tones are transmitted with audio; a particular
radio’s speaker (or the speakers of a group of radios) will unmute to broadcast a
transmission only if the associated subaudible tone identifies it as belonging to the
radio’s user group.

CDCSS

Continuous Digital Coded Squelch System - A system analogous to CTCSS but
using low speed digital signaling instead of subaudible tones.

Diagnostics

Tests to determine if any hardware or software problems exist.

DTMF

Dual-Tone, Multi-Frequency – is a method used by the telephone system to
communicate the keys pressed when dialing. Pressing a key on the phone’s keypad
generates two simultaneous tones, one for the row and one for the column.

HLGT

High level guard tone

LLGT

Low level guard tone

Patch

A term synonymous with interconnect

PTT

Push-to-talk – a switch that causes the radio to transmit when pressed.

RX, Receive

To accept a signal from a radio.

TX, Transmit

To send a signal to a radio.

Squelch

A system that prevents audio from being heard when no signal is being received.


Advertising