GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual - Manual (Page 6)

Foreword ICP9000 Navigator Installation and Service Manual
12/10 2
Scope of Manual
This manual offers descriptive data and service information for the ICP9000 Navigator Series Console.
Service diagrams and printed circuit board details are a part of this service manual.
The ICP9000 Navigator Series Console Operator’s Manual, Pub. 43004-025, is another publication
related to the operation of the console. It is available through a shortcut in the XAC2000A Navigator
Programming Software or on our website at www.gai-tronics.com.
Instructions for configuring the console are included with the GAI-Tronics CARD Suite Software. The
software must be registered with GAI-Tronics prior to use.
Ordering Replacement Parts
When ordering replacement parts or requesting equipment information, please include the complete
identification number. This applies to all components, kits, and chassis. If the component part number is
not known, the order should include the number of the chassis or kit of which it is a part and sufficient
description of the desired component to identify it. Order parts from:
Customer Service
GAI-Tronics Corporation
400 E. Wyomissing Ave.
Mohnton, PA 19540
US: 800-492-1212
Outside US: 610-777-1374
Service and Repair
Inoperative or malfunctioning equipment should be returned to the factory for repair. Please call
1-800-492-1212 to obtain a Return Authorization number, published repair prices, and shipping
instructions. A Return Authorization number can also be obtained by visiting our website at
www.gai-tronics.com
N OTE : A purchase order or credit card number is required prior to processing non-warranty repairs.