GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual - Manual (Page 36)

Navigator Configuration ICP9000 Navigator Installation and Service Manual
12/10 32
Setup - Configure Database
Use this form to add the channel button labels, programmable button names, and alert tone button labels.
N
OTES :
1. Channel button labels must be 12 characters or less, programmable button names must be six
characters or less, and alert tone labels must be six characters or less.
2. If no label is desired on a particular button, enter one or more spaces in the field for that button. This
includes Programmable Buttons 1 and 2 as well as the four Alert Tone buttons.
Figure 14.
Setup - Audio Options
Audio options are established for host PC sound card settings. Use this form to set up audio parameters
Mixer name, Master Volume, and Line In. Mixer name must be chosen first. Only one name is available
unless there is more then one sound card. The names for Master Volume and Line In are dependent on
the sound card manufacturer.
Figure 15.