GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual - Manual (Page 59)

ICP9000 Navigator Installation and Service Manual Features and Options
55 12/10
Supervisory Control CP0050/XCP0050A
The Supervisory Control option provides the ability to override parallel consoles on selected channel(s) to
comply with FCC regulations. The unit mounts as a “bustle-back” on the rear panel of the console. Refer
to the ICP9000 Navigator Series Console Operator’s Manual, available in the Help menu of the
XAC2000A Navigator Software, for user instructions for the supervisory control.
Direct Enhanced Full Duplex Phone Interface CP0070 (Option Code CTI)
The Direct Enhanced Phone Interface option consists of an optional telephone interface board. It adds a
PSTN phone interface, inbound and outbound phone calling capability, phone patch and radio patch
features to the ICP9000 Navigator.
Ring Detect Sensitivity
Jumper J400 is provided to allow operation under a wide range of ring voltages. It provides two ring
sensitivities:
• JU400 IN (default) – 70 V ac ring voltage
• JU400 OUT (parked) – 25 V ac ring voltage
Refer to the ICP9000 Navigator Series Console Operator’s Manual, Pub. 43004-025, available in the
XAC2000A Navigator Software, for complete user instructions.