File save, File exit, Setup - select com port – GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual User Manual
Page 35
Advertising
ICP9000 Navigator Installation and Service Manual
Navigator Configuration
31
12/10
File Save
Saves the database to a path determined by the user. Use the Open function to retrieve the originally
saved database.
Figure 12.
The above section refers to backing up the profile database.
File Exit
Closes the ICP9000 Navigator GUI application.
Setup - Select Com Port
This selection can be set in the operator setup and should only be enabled only for authorized personnel.
This selects the current communications port to connect to the main CPU.
WARNING
ALL Communications between the MCU and the PC cease during this selection.
Figure 13.
Advertising