GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual - Manual (Page 24)

Installation ICP9000 Navigator Installation and Service Manual
12/10 20
Selected/Unselected Audio Connections
The rear panel connector TB2, a 4-pin removable terminal block, provides connection from the MCU to
the line-in jack on the computer’s sound card. Cable Part No. 61531-029 is provided to connect the audio
to the computer. This cable is provided with a 1/8-inch stereo plug at one end and tinned leads at the
other. Connection to TB2 is displayed in Figure 6 below.
Figure 6. Audio Connections – Cable No. 61531-029