Gasboy TopKAT PLUS - Manual (Page 49)

MDE-5013C TopKAT™ PLUS Installation Manual · February 2015 Page 3-23
Electronic Pump - Wiring Description (Pedestal Mount) TopKAT PLUS Installation Procedures
Electronic Pump - Wiring Description (Pedestal Mount)
General
The wiring in the terminal block differs in accordance with the type of electronic pump
installed in the home base station. There are several types of electronic pumps. The wiring
required for the following pumps is described below:
• RS-485
For the wiring list label attached to the inner side of the unit, see Figure 3-20 .
• The rows are the connection ports in the terminal block in an ascending order.
• Each column is dedicated for a specific pump.
• Each cell defines the signal attached to the terminal block port.
Figure 3-20: TopKAT PLUS Terminal Block - Wiring List Label