Gasboy TopKAT PLUS - Manual (Page 58)

Printer Description
Page 4-2 MDE-5013C TopKAT™ PLUS Installation Manual · February 2015
Description
The printer module G2 is a compact, ruggedized thermal printer suitable for the harsh
environment of the gas station. It uses thermal printer paper only (55 gr., 40 X 57 mm).
The printer module G2 is connected to the station controller through an RS-485 link and it
requires a 24-26 VDC power supply input.
The printer module G2 is packed in a compact aluminum enclosure designed to survive the
harsh forecourt environment. It uses spark gaps protection for the links and 1.5 KV isolation
between the forecourt devices.
The printer includes two sensors for paper usage alerts:
• Low paper sensor - activated when there is approximately 25% of the paper roll left
• End paper sensor - activated when printer paper runs out completely
The paper usage and receipt indications include a buzzer sound, LED indicators or the
combination of both, dependent on the station controller.
Figure 4-2 and Figure 4-3 on page 4-3 show front and rear view of the printer module G2,
respectively.
Figure 4-2: Printer Module G2 Unit - General View
Green LED Indicator
Printer Case
Door
Receipt Aperture
(Paper Slice)
Green LED Indicator