Gasboy TopKAT PLUS - Manual (Page 70)

Printer Thermal Paper Storage
Page 4-14 MDE-5013C TopKAT™ PLUS Installation Manual · February 2015
3 Pull out any crumpled paper.
4 Clean the printer area from any paper remnants.
5 Push the green locking handle to its original state.
6 Slide the new paper roll into the pivot handle 2 in Figure 4-12 on page 4-11 . Ensure that the
paper roll to be inserted is not crumpled.
7 Insert the paper into the printer either automatically (refer to “Automatic Insertion of Paper”
on page 4-12 ) or manually (refer to “Manual Insertion of Paper” on page 4-12 ).
Thermal Paper Storage
The thermal paper is sensitive to the environmental conditions. Printer module operation is
sensitive to the type of paper inserted. To store the thermal paper, proceed as follows:
• Use the right paper, as specified.
• Insert the paper edge to the printer.
• Insert the paper in the correct side.
• Store the paper in a dry, shaded area, at 64 ºF (18 ºC) to 68 ºF (20 ºC).
• During paper replacement, avoid dust, moisture, and rain.
Note: Dispose of wet or damp paper. It may jam in the printer.