LSC Lighting maXim MP - Manual (Page 8)

Quick Reference maXim MP L(P) XL(P) XXL(P)
Operator Manual V3
Page 2 LSC Lighting Systems (Aust) Pty. Ltd.
To recall a filter memory press;
[filter], [f/a] (filter number).
To load the PatPad with the fixtures in a filter
memory including the filter selections press;
[get], [filter], [f/a] (filter number).
Groups
See also “Hi-lights” for more group functions.
To store a Group, get the required Fixtures onto the
PaTPad
then press;
[store], [group], [f/a] (Group Number).
Only Hi-lighted fixtures will be stored in the Group.
The order that fixtures were loaded onto the PatPad
is also stored in the group. This order is used by the
FANS function.
To get a Group onto the PatPad, press;
[get], [group], [f/a] (Group Number).
To get several Groups, press [get], HOLD [group],
TAP [f/a] (Group Number) [f/a] (Group Number),
etc, release [group].
Home
Homing a fixture sets all of its parameters to their home
values (from their template) and sets the parameter
times to their default values.
To home the selected Fixture press;
[home], [fixture displayer]
To momentarily home a Fixture press;
[home], [f/a] (Fixture Number).
To home filtered (flashing) parameters press;
[home], [filter].
To home ALL Fixtures on the PaTPad press;
[home], [all].
To home ALL patched Fixtures clear the PaTPad by
pressing; [clear], [all], then press; [home], [all].
To home ALL Fixtures that have an intensity level
on the output press; [home], [flash] (yellow master).
Clone
Only flashing parameters will be cloned.
To clone the selected Fixture on the PaTPad to
another Fixture, press;
[clone] [f/a] (destination Fixture Number).
To clone the selected Fixture to a Group, press;
[clone] [group] [f/a] (Group Number).
Palette
A palette refers to specific Fixture types.
To store a Palette, get one of each type of fixture,
filter for the desired parameter(s) then adjust the
parameter(s) to the desired value(s).
Press; [store], [palette], [Colour, Beam, Focus]
(optional page), [f/a] (Palette Number).
To load a Palette, press;
[palette], [Colour, Beam, Focus] (optional page),
[f/a] (Palette Number).
To load the PatPad with the fixtures in a palette
memory including the palette selections press;
[get], [palette], [Colour, Beam, Focus] (optional
page), [f/a] (Palette Number).
To clear all palettes (E) from parameters press;
[clear], [palette].
To include a link to a Palette in a scene; load the
Palette, then without altering any “E” (palEtte) (as
seen on video screen) parameters, store into the
desired scene number.
To remove a link to a Palette from a scene, press;
[clear], [all] (to clear the PaTPad).
Get the scene onto the PaTPad, press;
[get], [store], [page], [f/a] (scene number).
Clear the link to the Palette, press;
[clear], [palette].
Use either [record] (all current output) or [store]
(only flashing parameters) to save the scene back
into the same memory location.
Palette Playback (E-Mod)
HOLD [palette], it will lock on. You can now use the
[f/a] (palette number) buttons for live palette
playback. Press [palette] again to de-select.
Preset
A preset refers to specific Fixture numbers.
To store a Preset, get the fixtures to which the
preset will apply, filter for the desired parameters
then adjust the parameters to the desired values.
Press; [store], [preset], [Colour, Beam, Focus]
(optional page), [f/a] (Preset Number).
To load a Preset, press;
[preset], [Colour, Beam, Focus] (optional page),
[f/a] (Preset Number).
To load the PatPad with the fixtures in a preset
memory including the preset selections press;
[get], [preset], [Colour, Beam, Focus] (optional
page), [f/a] (preset number).
To clear all presets (p) from parameters press;
[clear], [preset].
To include a link to a Preset in a scene; load the
Preset, then without altering any “P” parameters (as
seen on video screen), store the desired scene.
To remove a link to a Preset from a scene, press;
[clear], [all] (to clear the PaTPad).
Get the scene onto the PaTPad, press;
[get], [store], [page], [f/a] (scene number).
Clear the link to the Preset, press; [clear], [preset].
Use either [record] (all current output) or [store]
(only flashing parameters) to save to the same
memory.
Preset Playback (P-Mod)
HOLD [preset], it will lock on. You can now use the
[f/a] (preset number) buttons for live presets
playback. Press [preset] again to de-select P-Mod.
Parameter Times
To change the times of a parameter;
HOLD
[PM] (parameter to change) until times
appear. Tap the ends of the displayer to select
either.
Mov
Move time.
Dly Delay time that must expire before the Move
time starts.
Flags----
Flags shows which flags (if any) have been
set to “yes”.