Orion System VCM-X E-BUS Component - Manual (Page 73)

VCM-X Component & Systems Wiring 73
Communication Devices
Typical Controller Board
Connector Cable
Modular Service Tool SD
Female DIN
Connector
Male DIN Connector
Be Sure The Modular Service
Tool Is Connected To The
Supplied Power Pack Or Has
Fresh Batteries Installed Before
Attempting Programming Of The
Controller. Be Sure The Power Is
Turned Off On The Modular
Service Tool Before Connecting
The Cable To The Controller.
The Modular Service Tool Can Be
Connected To
Or VAV/Zone Controller By
Plugging One End Of The
Supplied Cable Into the
Modular Service Tool DIN
Connector And The Other End
Into The DIN Connector On The
Controllers.
Power On Button
SD Memory Card
A Unit Controller
EBC
E-BUS
Port RS-485
Port
FILENAME
DATE: S. Olson
DESCRIPTION: PAGE
BY:
JOB NAME
1 of 1
05/15/15
OE391-12 Modular Service Tool
Connection Diagram
G-ModServiceTool-SD-1A.cdr
Modular Service Tool Connections
Figure 51: OE391-12 - Modular Service Tool SD Connections