Verilink APS 2000 T1 Line Protection (880-502411-001) Product Manual - Manual (Page 14)

Overview
1-6 Verilink APS 2000 User Manual
SNMP Alternatively, the operator can use an SNMP manager (such as
SunNet Manager or HP OpenView) via either a SLIP or Ethernet
connection. Verilink’s proprietary MIB augments the standard MIBs
to provide the same management capabilities as Verilink’s Craft
interface.
The SLIP and Ethernet connectors are located on the CIM 2022 APS,
which mounts to the back of the SCC 2120, against the shelf
midplane.
The SLIP connection runs at 9600Kbit/s and the Ethernet
connection at 10 Mbit/s.
System Hardware
Every APS 2000 system node with full T1 protection switching
consists of at least a shelf, a power supply, and modules with the
appropriate cabling.
The APS 2000 Line Protection System works with either Multi-line
or Dual-line shelves.
MLS 2200 Shelf The MLS 2200 has 13 plug-in module slots. The two redundant
power supplies provide power to all of the plug-in modules.
Figure 1-2 Multi-line Shelf (front view)
With cabling, the control bus can be expanded to additional shelves
for increased node capacity.
More Information For more information on power supplies and shelves, see the
manual
AS2000: The Basics .
Mounting Ear
(each side of shelf)
TAC 2110
(12 slots)
Power Supplies
SCC 2120