Settings tab – Wavetronix Command DataView (CMD-DV) - User Guide User Manual
Page 74
Advertising
CHAPTER 7 • SYSTEM PAGE
73
Note
In cases where stations are assigned to more than one station group, you will have
access to any station where at least one of the station groups is allowed for that user,
even if one or more are not.
Settings Tab
The Settings tab contains a variety of system settings. Normal day-to-day use of DataView
will not require any adjustment to system settings. Generally, only a system administrator
will have access to any of the settings on this tab.
Figure 7.2 – Settings Page
Advertising