Grass Valley NV9000-SE v.5.0 - Manual (Page 330)

312
Control Panels
NV9648
 Before you can complete an NV9648 “client” configuration, you must have defined an
NV9649 server configuration. The NV9648 references the NV9649 by its panel ID.
Configuration Page for Standalone Mode
This is a sample NV9648 panel configuration page for standalone mode:
The panel in standalone mode functions much the same way it does in client mode, but (1) does
not require the presence of an NV9649 and (2) provides 2 additional button functions.
As under client mode, the panel has 3 sections that are independent control units. Each unit
corresponds to a destination that is selectable.
Each section’s display shows its own destination. (The display reads “NO DEST” if no destination
has been selected.
Button
Definition
Section
GPIO
Definitions
Panel
Options
Panel
Image: