Grass Valley NV9000-SE v.5.0 - Manual (Page 340)

322
Control Panels
NV9649
NV9649 Configuration Page(s)
The NV9649 panel can be configured to operate under 3 behavioral models:
• ‘Panel Server’ mode.
• ‘NV9609 Panel’ mode.
• ‘LCD XY/MD’ mode.
The behavioral model is selected in the first entry of the panel options. That entry is a drop-
down list. The panel configuration pages differ greatly under the 3 models. The set of button
functions differ and the panel options also differ.
Common Page Features
Panel Graphic
At the top of the page is a graphic representation of the NV9649 panel. Configurers must click a
button “proxy” in the graphic to select the button for configuration.
Tally (GPIO) Section
This is the tally section of the configuration page.
It has two sections: inputs and outputs. By clicking on one of the input or output buttons, you
can configure that input or output. (These buttons represent the DB25 connector at the rear.)
See GPIO on page 197.
Commitment Buttons
Two buttons at the bottom of the configuration page are self-explanatory and present on most
configuration pages:
• Revert to Saved. Press this button if you want to discard any recent changes you have made.
• Save. Press this button to commit all your recent changes.
• Save & Close. Press this button to commit all your recent changes and dismiss the page.
These actions are not reversible.
Clear Configuration Button
The ‘Clear Configuration’ button, located in the ‘Panel Options’ regions, completely empties the
configuration, reverting to default values. The button does not, however, change the selected
behavioral model.