Grass Valley NV9000-SE v.5.0 - Manual (Page 460)

442
Tielines
Control Systems Table
Control Systems Table
The ‘Control Systems’ table (under the ‘Views’ pane) lists all the control systems defined in your
configuration. This is a sample ‘Control Systems’ page:
This table exists to support tielines. There are 3 sections in the page:
• Filter
• Control System List
• Buttons
Filter
At the top of the page is a ‘Name’ filter: if you enter text in this field, the control system list is
restricted to those systems whose names contain the text you entered.
Control System List
The control system list has 4 columns:
• ID. These are database IDs assigned to the control systems. You cannot change these fields.
• Name. These are the names of the control systems. You can edit the names in this table.
• IP address. These are the IP addresses of the control systems. You can edit the IP addresses in
this table.
• The description field is free-format. Use it to cooment on your control system.
You can use click, shift-click, and control-click techniques to select any of the entries in the list.
Filter
Control
System
List
Buttons