Epson WP-M4595DNF - Manual (Page 112)

Menu Setting Item Description
Fax Settings Send Settings Resolution: Select this option to change the
resolution for fax data you are sending.
Quality: Select this option to change the quality for
fax data you are sending.
Contrast: Select this option to change the contrast for
fax data you are sending.
2-Sided Faxing: Turn on when sending 2-sided
originals in the ADF.
Last Transmission Report: Indicates whether or
when the product prints a report for outgoing faxes.
Select Off to turn off report printing, select On Error
to print reports only when an error occurs, or select
On Send to print reports for every fax you send.
Receive Settings Paper Source to Print: & See “Selecting paper source
to print fax” on page 99
Auto Reduction: Indicates whether large received
faxes are reduced in size to fit on A4-size, or printed at
their original size on multiple sheets.
Fax Output: & See “Changing Fax Output setting to
print” on page 99
Communication Dial Mode: Indicates the type of phone system to
which you have connected the product. Depending
on the region, this setting may not be displayed.
DRD: Indicates the type of answer ring pattern you
want to use to receive faxes. To select an option other
than All (or Off), you must set up your phone system
to use different ring patterns. This option may be On
or Off depending on the region.
ECM: Indicates whether or not to use Error Correction
Mode to automatically correct fax data sent/received
with errors due to the line or any other problems.
Color faxes cannot be sent/received when ECM is off.
V.34: Indicates the speed at which you transmit and
receive faxes. On is 33.6 Kbps and Off is 14.4 Kbps.
Rings to Answer: Indicates the number of rings that
must occur before the product automatically receives
a fax. Depending on the region, this setting may not
be displayed.
Dial Tone Detection: When this is set to On, the
product starts dialing after it detects a dial tone. It may
not be able to detect a dial tone when a PBX (Private
Branch Exchange) or a TA (Terminal Adapter) is
connected. In that case, set to Off. However, doing so
may drop the first digit of a fax number and send the
fax to the wrong number.
Header: & See “Creating header information” on
page 98
Check Fax Connection Checks the status of your fax connection.
Print Status Sheet - & See “Print Status Sheet” on page 110
User’s Guide
Using the Control Panel
112