Replacing a maintenance box – Epson WP-M4595DNF User Manual

Page 128

Advertising
background image

❏ Do not tilt the used maintenance box until it is placed in the plastic bag provided.

❏ Do not reuse a maintenance box which has been removed and left detached for a long period.

❏ Keep the maintenance box away from direct sunlight.

Replacing a maintenance box

To replace the maintenance box, follow the steps below.

A

Confirm that the product is not draining the ink.

B

Remove the replacement maintenance box from the package.

Note:
Do not touch the green chip on the side of the box. Doing so may prevent normal operation.

C

Push the buttons on either side of the rear unit at the same time, and then pull the unit out.

D

Put your hand on the handle of the maintenance box, and then pull the box outward.

Note:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them
immediately with water.

E

Put the used maintenance box in the plastic bag provided with the replacement box, and dispose of it properly.

Note:
Do not tilt the used maintenance box until after it is sealed in the plastic bag.

User’s Guide

Replacing Consumables

128

Advertising
This manual is related to the following products: